STRENGTHENING

Bossong technology

Bossong anchors for controlled injection.

GBOS ANCHORS

Injected anchors with sock and Presstec grout with GBOS bars  

TBOS anchors

Injected anchors with sock and Presstec grout with TBOS bars

RBOS anchors

Injected anchors with sock and Presstec grout with RBOS bars

Accessories and complements

Bossong plastic sleeves with thread ends for continuous protection system; nylon insulation washer; metallic pipe fittings drilling machine/BOS TP plastic sleeves.

Installing anchors for controlled injection

 Drilling Assembling and installing Grout injection

Research and development

Technical support

Cooperation with the designer Tests in place Rents and training

Chemical anchors for strengthening

There are certainly technical and theoretical reasons determining whether an anchorage should be realized with resin or grout. However, in the practical application it is not so easy to define such limit, because of many factors, such as the compatibility with the original materials or simply feasibility problems during the execution. Significant parameters for choosing the type of anchors are: - type of substrate - anchorage length - hole diameter - setting time and fixing mode - waiting times for the loading of the anchorage